This week I was continuing my work on rewriting the stoplight code in a more efficient manner.
Code so far
/*
Add in warning time in the array
Replace the total with sizeOf in the for loop
Move the period type out of the conditional
Debug mode
Double check all greater than and less than or equal to signs
*/
#include "AdafruitIO_WiFi.h"
@@ -38,10 +40,10 @@
#define AAC 2
#define EXT 3
//Array defines
//Array defines
#define HOURS 0
#define MINUTES 1
#define DURATION 2
#define MINUTES 1
#define DURATION 2
#define PERIOD 3
#define SCHEDULE 4
@@ -52,8 +54,9 @@ char daysOfTheWeek[7][12] = {"Sunday", "Monday", "Tuesday", "Wednesday", "Thursd
WiFiUDP ntpUDP;
NTPClient timeClient(ntpUDP, "pool.ntp.org", utcOffsetInSeconds);
int scheduleType = EXT;
char periodName[9][10] {"Advisory", "Period 1", "Period 2", "Period 3", "Period 4", "Period 5", "Period 6", "Lunch", "Activity"};
int scheduleType = REG;
int nowTime = 460;
int schedule[32][5] {
{7, 45, 4, ADV, REG},
@@ -94,13 +97,18 @@ int schedule[32][5] {
};
// Converts the hours and minutes of the array into # of minutes since 12:00 am
int convert_time(int hrs, int mns) {
int conv_time;
conv_time = hrs * 60;
conv_time = conv_time + mns;
return conv_time;
int hoursMinToMinTotal(int hrs, int mns) {
return hrs * 60 + mns;
};
uint8_t minTotalToHours (uint16_t minTotal) {
return minTotal /= 60;
}
uint8_t minTotalToMins (uint16_t minTotal) {
return minTotal %= 60;
}
void setup() {
Serial.begin(115200);
@@ -121,39 +129,65 @@ void setup() {
void loop() {
timeClient.update();
int hrs = timeClient.getHours() + DAYLIGHTSAVINGS;
int mins = timeClient.getMinutes();
int secs = timeClient.getSeconds();
int nowTime = convert_time(hrs, mins);
// timeClient.update();
// int hrs = timeClient.getHours() + DAYLIGHTSAVINGS;
// int mins = timeClient.getMinutes();
// int secs = timeClient.getSeconds();
// int nowTime = hoursMinToMinTotal(hrs, mins);
nowTime++;
int hrs = minTotalToHours(nowTime);
int mins = minTotalToMins(nowTime);
delay(100);
Serial.print(hrs);
Serial.print(":");
Serial.print(mins);
Serial.print(":");
Serial.print(secs);
Serial.println(" ");
// Serial.print(secs);
// Serial.println(" ");
for (int i = 0; i < 31; i++) {
int periodStartTime = convert_time(schedule[i][HOURS], schedule[i][MINUTES]);
int periodEndTime = periodStartTime + schedule[i][DURATION];
int periodWarningTime = periodEndTime - 5;
//Class time turn on Green
if (nowTime >= periodStartTime && nowTime <= periodWarningTime && schedule[i][SCHEDULE] == scheduleType ) {
//Green light
Serial.print("GREEN ");
Serial.print(schedule[i][PERIOD]);
Serial.print(" ");
Serial.println(i);
} else if (nowTime < periodWarningTime && nowTime <= schedule[i][SCHEDULE]) {
Serial.print("YELLOW ");
Serial.print(schedule[i][PERIOD]);
Serial.print(" ");
Serial.println(i);
if (schedule[i][SCHEDULE] == scheduleType) {
int periodStartTime = hoursMinToMinTotal(schedule[i][HOURS], schedule[i][MINUTES]);
int periodEndTime = periodStartTime + schedule[i][DURATION];
int periodWarningTime = periodEndTime - 5;
int nextPeriodTime = hoursMinToMinTotal(schedule[i+1][HOURS], schedule[i+1][MINUTES]);
//Class time turn on Green
if (nowTime > periodStartTime && nowTime <= periodWarningTime) {
//Green light
Serial.print("GREEN ");
Serial.print(periodName[schedule[i][PERIOD]]);
Serial.print(" ");
Serial.print(i);
Serial.print(" ");
} else if (nowTime > periodWarningTime && nowTime <= periodEndTime) {
Serial.print("YELLOW ");
Serial.print(periodName[schedule[i][PERIOD]]);
Serial.print(" ");
Serial.print(i);
Serial.print(" ");
} else if (nowTime > periodEndTime && nowTime <= nextPeriodTime) {
Serial.print("RED ");
Serial.print(periodName[schedule[i][PERIOD]]);
Serial.print(" ");
Serial.print(i);
Serial.print(" ");
}
}
}
Serial.println(nowTime);
if (nowTime > 800) {
nowTime = 400;
}
delay(500);
// delay(500);
}
You can also find more on my Github.
Later in the week, I transitioned to working with my classmates on our science fair project.
On Thursday I started a project on the lathe with Mr. L, trying to follow this video:
Definitely a cool thing to try and turn and I will need the experience from this project to eventually take over to the bolt-action pen project.